Introduction of mixing equipment

The machine is mainly by mechanical stirrer, air flow and the jet of liquid to make the mixing to achieve uniform mixing. Agitation causes a portion of the liquid flow and the flowing liquid pushes the surrounding liquid and to form a recycle stream within the container, the diffusion between the resulting liquid is called the main convection diffusion. The high speed liquid flow caused by the agitation by occurs in the interface between the low-speed flow of the high-speed stream and the surrounding shearing action, thereby generating a large number of belt dryer. These whirlpool rapidly spread around, again volumes more liquid into the whirlpool of the liquid mixing equipment. It requires all materials participate in the mixing are evenly distributed. The degree of mixing is divided into the ideal mixed, randomly mixed and completely mixed. The degree of mixing of the various materials in the mixing machine depends on the proportion of the material to be mixed, the physical state and characteristics, as well as the duration of the type of mixing machine and mixing operations and other factors.

Methods to clean up mixing machinery

Second, when do the clean-up of mixer, we must clean all parts of best rotary dryer, gate at intermediate positions and cutting and use a broom to sweep. Third, the mixer must be checked, and clear the water sprinklers to the smooth flow of state. Fourth, do not knock the shovel chip and scraper. Remove and wash the respirator, and then dry for the next use. Fifth, when the clean-up is completed, notify maintenance personnel to overhaul and the mixed working have to help to ensure the safety. After the repair is completed, and confirms mixer personnel, tools or other items and operate the mixer commissioning manually, and the mixer is in the state of standby and make maintenance records.

Major structural features

Firstly, the machine s operated by the stirring of V-belt pulleys and the worm gear. Secondly, the both ends of the stirring shaft can prevent the traverse agitation caused by the radial load acts and there are adjustment screws at both ends,First, close the gates of the mixer and valve of mixer before empty the mixer, and manually turn on the mixing machine to discharge mixer materials for waste disposal to achieve a standby state of the vacuum mixers. which can freely adjust the axial position of the worm wheel of the right power, so that adjust the centerline of the worm. Thirdly, when pouring, start pouring motor co-rotating mixing box to the appropriate location to pour the role of self-locking worm gear, worm drive, mixing box at any angle pouring.

We are a professional company which in producing daily-use chemical industry, medical machinery, food machinery, pure water equipment, etc. Company based in Provincial light cosmetic research center of Japan Research institutions for the strong backing of spray dryer manufacturer, by introducing senior engineers and technical experts.